Cisco ONS 15454 - Page 385

NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf
This procedure installs the power modules in the ONS 15454 M6 system.Purpose
#2 Phillips screwdriverTools/Equipment
• NTP-G252 Install the ONS 15454 M6 Shelf , on page 294.
• NTP-G259 Open and Remove the Standard Door of the ONS 15454 M6
Shelf , on page 327.
• Connect the chassis to the office ground. For detailed instructions on how
to ground the chassis, see the Electrostatic Discharge and Grounding Guide
for Cisco CPT and Cisco ONS Platforms.
Prerequisite Procedures
RequiredRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
The plug-socket combination must be accessible at all times because it serves as the main disconnecting
device. Statement 1019
Warning
Procedure
Step 1 Complete the necessary task as applicable:
• DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf, on page 355
• DLP-G757 Replacing 15454-M6-AC With 15454-M6-AC2 Power module, on page 358
• DLP-G758 Replacing 15454-M6-AC2 With 15454-M6-AC Power module, on page 359
• DLP-G570 Install the DC Power Module in the ONS 15454 M6 Shelf, on page 360
• DLP-G737 Replacing 15454-M6-DC With 15454-M6-DC20 Power Module, on page 363
• DLP-G738 Replacing 15454-M6-DC20 With 15454-M6-DC Power Module, on page 365
Step 2 Complete the NTP-G256 Install Power and Ground to the ONS 15454 M6 Shelf , on page 370.
Stop. You have completed this procedure.
DLP-G569 Install the AC Power Module in the ONS 15454 M6 Shelf
This task installs the 15454-M6-AC or 15454-M6-AC2 power module in the ONS
15454 M6 system.
Purpose
Cisco ONS 15454 Hardware Installation Guide
355
Installing the ONS 15454 M6 Shelf
NTP-G524 Install the Power Modules in the ONS 15454 M6 Shelf