Figure 82: Right and Left ANSI 19” Bracket
Step 3 Install the right Mesh Panel unit in the ANSI 19" rack. To ensure safe unit mounting, use at least two screws
on each side.
Figure 83: Mesh Panel Unit
Figure 84: Mesh Panel Unit, Front View
Step 4 Install the right Vertical cable guide (VCG) using the washer and the screw provided with the installation kit.
Cisco ONS 15454 Hardware Installation Guide
165
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Install PP-Mesh on an ANSI 19" Configuration
To Next Page
Loading...
