Figure 94: Mesh Panel Unit in ETSI Rack, Front View
Step 4 Install the right Vertical cable guide (VCG) using the washer and the screw provided with the installation kit.
Figure 95: Vertical Cable Guide
The Vertical Cable Guide can be installed in top position (left illustration), if the fibers are connected
from the top, or they can be installed in bottom position (right illustration), if the fibers are connected
from the bottom.
Note
Cisco ONS 15454 Hardware Installation Guide
172
Installing the ONS 15454 M12 (ANSI and ETSI) Shelf
Install PP-Mesh on an ETSI Configuration
To Next Page
Loading...
