Figure 154: Installing the AC Power Module
Step 2 Plug the AC power module completely into the chassis.
Step 3 Tighten the screw to a torque value of 4 in-lb (0.45 N-m) to lock the power module in the chassis (see the
following figure).
Figure 155: AC Power Module Installed in the ONS 15454 M2 Shelf
Stop. You have completed this procedure.
Cisco ONS 15454 Hardware Installation Guide
232
Installing the ONS 15454 M2 Shelf
DLP-G592 Install the AC Power Module in the ONS 15454 M2 Shelf
To Next Page
Loading...
