75-ohm coaxial cable with a DIN 1.0/2.3 miniature coax connector. The PID for
the BITS IN/OUT cable is 15454-M-TMGCBL=.
Tools/Equipment
NonePrerequisite Procedures
As neededRequired/As Needed
OnsiteOnsite/Remote
NoneSecurity Level
Procedure
Step 1 Locate the timing BITS connectors in the DC-2E or AC-2 Power Module, as shown in the following two
figures.
Cisco ONS 15454 Hardware Installation Guide
258
Installing the ONS 15454 M2 Shelf
DLP-G293 Install Timing Wires in ONS 15454 M2 - ETSI
To Next Page
Loading...
