Figure 255: Power Cable Exit
Step 4 Connect the power cable to the fuse panel or power source.
The voltage rating value for AC power ranges between 100 VAC to 240 VAC depending on the
standards in various countries.
Note
Turn on the power after installing the power cables.
Note
Step 5 Return to your originating procedure (NTP).
Table 33: PIDs for AC Power Cables
PIDCable
15454-M-CBL-L-JPN=AC power cable - Japan left exit
15454-M-CBL-R-JPN=AC power cable - Japan right exit
15454-M-CBL-L-CHI=AC power cable - China left exit
15454-M-CBL-R-CHI=AC power cable - China right exit
15454-M-CBL-L-IND=AC power cable - India left exit
15454-M-CBL-R-IND=AC power cable - India right exit
15454-M-CBL-L-EU=AC power cable - EU left exit
15454-M-CBL-R-EU=AC power cable - EU right exit
Cisco ONS 15454 Hardware Installation Guide
376
Installing the ONS 15454 M6 Shelf
DLP-G571 Connect Office Power (AC) to the ONS 15454 M6 Shelf
To Next Page
Loading...
