Figure 280: Upgrading the ONS 15454 Multishelf Configuration Connected to the Catalyst 2950
Step 6 To configure the Catalyst 3560 (extended) using IOS commands, complete the NTP-G298 Configure a Cisco
Catalyst 2950 or Catalyst 3560 (Active and Standby) for a ONS 15454 Multishelf Node, on page 152.
Step 7 Return to your originating procedure (NTP).
Cisco ONS 15454 Hardware Installation Guide
422
Installing the ONS 15454 M6 Shelf
DLP-G687 Upgrade the ONS 15454 Multishelf with the Catalyst 2950 Switch Configuration
To Next Page
Loading...
