Getting Started
Using the Web Administration User Interface
Cisco SPA and Wireless IP Phone Administration Guide 29
2
Configure parameters to adjust SIP stack and
protocols. To enable:
•
CTI
• SIP-B
• STUN
SIP tab
See Chapter 5, “Configuring
SIP, SPCP, and NAT.”
Configure provisioning parameters. To:
• Enable remote provisioning
• Enable firmware upgrades
• Set general purpose parameters
Provisioning tab
The
Provisioning
tab is viewable
by Admin logins only.
See Chapter 7, “Provisioning
Basics.” For additional
information about provisioning,
see the
Cisco SPA Provisioning
Guide
(for Cisco service
providers).
Configure parameters that depend on country or
region, including:
• Call progress tones
• Ring patterns
• Star codes/vertical service activation codes
• Vertical service announcement codes
• Local date/time and language
Regional tab
See Chapter 8, “Configuring
Regional Parameters and
Supplementary Services.”
Configure General phone station info, which
applies to all extensions configured for the phone,
including:
• Station name, voice mail number, text logos
and background pictures
• Extension numbers for line keys
• Shared call (line) appearance
• Enabling call conferencing, call forward, call
transfer, and so on.
• Select ring tones, audio input, and extension
mobility settings
Phone tab
See Chapter 4, “Customizing
Cisco SPA and Wireless IP
Phones.”
To perform these tasks... On the web UI, click the ...
To Next Page
Loading...
Need help?
General
