BIOS Utilities
Security Menu 5 - 15
5
Pending TPM operation (Security Menu > TPM Support & TPM State Enabled)
Select Pending TPM operation, press Enter and select the option you require (if
you are initializing TPM you should select Enable Take Ownership). You will then
need to press F4 to save the changes and restart the computer. You can now install
the TPM driver (see “Trusted Platform Module (TPM) Driver Installation” on
page 7 - 78) and then initialize the TPM.
Figure 5 - 7
Pending TPM
operation
(Enable Take
Ownership)
To Next Page
Loading...
