Modules
7 - 98 IRST Driver
7
IRST Driver
Install the Intel Rapid Storage Technology to support your SATA drive if set up in
AHCI mode in the BIOS (see “SATA Mode (Advanced Menu)” on page 5 - 9) or
if you have set up your hard disks in a RAID configuration (“Setting Up SATA
RAID or AHCI Mode” on page 7 - 2).
1. Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
2. Click Option Drivers (button).
3. Click
7./6.Install IRST Driver
> Yes
.
4. Click Next > Next > Yes > Next > Next.
5. Click Finish to restart the computer (you will need to restart the system
again after the computer has rebooted).
Note that after installing the IRST driver the Windows system may take up to
5 minutes at startup to load all the drivers. By default, Intel® Rapid Storage
Technology is set to Automatic (Delayed Start). See page 8 - 16 for details on how
to change this setting.
To Next Page
Loading...
Need help?
General
