AMD Video Driver Controls
D - 18 HDMI Audio Configuration
D
HDMI Audio Configuration
HDMI (High-Definition Multimedia Interface) carries both audio and video signals.
Configure the audio output as per the instructions below.
1. Connect a device with HDMI support to the HDMI-Out port.
2. Click
Start
, and click
Control Panel
(or point to
Settings
and click
Control Panel
).
3. Click Sound (Hardware and Sound), and click Playback (tab).
4. Depending on your display, the playback device may be selected automatically;
however in some cases you may need to select the audio device and click
Set Default
(button) or select
Realtek Digital Output
and click
Set Default
(button).
Figure D - 16
Sound - HDMI
Device
(Set Default)
To Next Page
Loading...
