RAID Setup (Windows 8) F - 61
Windows 8
Windows 8
Deleting a RAID (Windows 8)
If you wish to delete an existing RAID then follow the procedure below to do so. However
backup up any neces-
sary files and data before deleting a RAID
, as doing so will result in the loss of all data on the RAID volumes.
1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Go to Intel(R) Rapid Storage Technology (in the Advanced menu) and press <Enter>.
3. Go to the RAID (listed under RAID Volumes:) and press <Enter>.
4. Select Delete and press <Enter>.
Figure F - 50 - Delete RAID (Advanced > Intel(R) Rapid Storage Technology)
5. Select “Yes” (note that al the data on the volumes will be lost) and press <Enter>.
6. The RAID will then be deleted.
To Next Page
Loading...
Need help?
General
