Modules
Intel Rapid Storage Technology 7 - 15
7
Initializing, Verifying and Repairing RAID Volume Data
1. Before verifying the volume data you will need to initialize the volume.
2. Run the Intel® Rapid Storage Technology enterprise application from the Intel
item in the All Programs menu.
3. Click the volume icon and click Initialize in Volume Properties.
4. Click Yes (button) to begin the process.
5. The completion percentage will be listed under Information (Note this process
may take some time depending on the number and size of disks).
Figure 7 - 5
Intel® Rapid
Storage
Technology
enterprise
Initialize
The completion percentage
will be listed under Information.
To Next Page
Loading...
