Modules
Wireless LAN Module 7 - 41
7
4. Click Connect to connect to the select WiFi network access point.
5. If the access point is encrypted then you will need to enter the password and click
OK.
6. You can turn WiFi On/WiFi Off from the button at the bottom of the Utility.
7. To disconnect, select the connected access point and click Disconnect.
8. Select Help from the menu at the top of the utility (or at the bottom right) to bring
up the Help menu.
Figure 7 - 20
Intel® PROSet/
Wireless WiFi
Connection Utility
(Connecting &
Connected)
To Next Page
Loading...
Need help?
General
