To Next Page

To Previous Page

Troubleshooting

8 - 10 Problems & Possible Solutions

I am sliding my finger up

and down on the right

side of the TouchPad to

scroll a Window and the

TouchPad does not

respond.

There are different TouchPad versions available on this computer, and this version requires

tapping/holding to scroll. Either tap repeatedly, or hold the finger down, at the top or bottom right

of the touchpad (depending on the scrolling direction required) to scroll the window.

The system freezes or

the screen goes dark.

The system’s power saving features have timed-out. Use the AC/DC adapter, press a key on the

keyboard, or press the sleep (Fn + F4) key combination, or press the power button if no LEDs are

lit.

The system never goes

into a power saving

mode.

Power Options features are not enabled. Go to the Windows Power Options menu and enable

the features you prefer (see “Power-Saving States” on page 3 - 6). Make sure you have

enabled Hibernate mode from the control panel.

The Wireless LAN/

Bluetooth/PC Camera

modules cannot be

detected.

The modules are off. Check the appropriate Touch Sensor indicator to see if the modules are on

or off (see “Touch Sensor Instant Keys” on page 1 - 9). If the LED indicator is not illuminated,

then press the appropriate touch sensor instant key/function key combination in order to enable

the modules.

The Wireless LAN/

Bluetooth/PC Camera

modules cannot be

configured.

The driver(s) for the module(s) have not been installed. Make sure you have installed the driver

for the appropriate module (see the instructions in Chapter 7 “Modules” for the appropriate

module).

Problem Possible Cause - Solution

Clevo P570WM User Manual

Other manuals for Clevo P570WM