Clevo P570WM

AMD Video Driver Controls
D - 20 HDMI Audio Configuration
D
HDMI Notes
• Connect a device with HDMI support to the HDMI-Out port BEFORE attempt-
ing to play audio/video sources through the device.
• To play audio sources through your external display’s (TV or LCD) speakers
you will need to go to the audio configuration control panel on the display and
configure the audio input accordingly (see your display device manual).
HDMI Video Configuration
1. Connect an HDMI cable from the HDMI-Out port to your external display.
2. Configure your external display as per the instructions in “Configuring an
External Display In the CCC” on page D - 8.
3. Set up your external display (TV or LCD) for HDMI input (see your display device
manual).
4. You can now play video/audio sources through your external display.
Sound Blaster Audio & HDMI
1. When you connect an HDMI display to the HDMI-Out port, the Sound Blaster con-
trols will be disabled.
2. A warning box will pop-up and will prompt “...Do you want to select another
audio device now?”.
3. Click No to continue using the HDMI audio output from your external display (do
not attempt to select another audio device when connected to the external HDMI
display).

Other Applications
If you are using a third
party application to
play DVDs etc. from
any attached DVD de-
vice, you will need to
consult the applica-
tion’s documentation
to see the appropriate
audio configuration
(the application must
support digital to ana-
log translation).