OPERATING THE TRANSCEIVER
DATA OPTIONS
98 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
NOTE: For more information on setting up and using an RM50e
email station, please see the documentation provided
with the modem and the RC50-C on-line help.
Sending email via RC50-C
An email message is sent via your email client to the RC50-C HF Email
software, which passes it to the RM50e. The RM50e passes the message
to the transceiver, which transmits it over the air. The RM50e can
operate in clear or secure mode.
To send an email message:
1 Launch the RC50-C HF Email software, then click Go Online
to activate the RM50e HF Data Modem.
The transceiver responds with a beep.
1 Compose your email message in your email client software, for
example Microsoft® Outlook®, then send it to the recipient.
When a signal is transferred between the data modems across the
link established by the transceivers, the current transmit or
receive data rate is indicated on the right-hand side of the Clear
Data indicator.
While the message is being sent between the transceivers,
activity is reported on the screen of the control point.
To Next Page
Loading...
Need help?
General
