COMPLIANCE
EUROPEAN R&TTE DIRECTIVE
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 173
Radiation safety (EU installations only)
To ensure optimal transceiver performance and to avoid exposure to
excessive electromagnetic fields, the antenna system must be installed
according to the instructions provided.
WARNING: High voltages exist on the antenna during transmission
and tuning. Do not touch the antenna during these
activities. RF burns may result.
WARNING: Install the earthing system or counterpoise as directed to
prevent RF burns from any metal part of the transceiver.
WARNING: You should not transmit from your transceiver or tune the
antenna unless people are beyond the safe working
distance for the installation.
The following safe working distances apply:
• anywhere within the vehicle cabin with an externally mounted
mobile antenna
• 3 m unobstructed, of any part of a mobile antenna
• 2 m of any part of a fixed antenna
Safe working distance is based on continuous exposure to CW-type
transmissions, as set out in the Human Exposure Restrictions standard
EN 62311:2008.
Declaration of Conformity and Notified Body Letter
of Opinion
The CE Declaration of Conformity and Notified Body Letter of Opinion
for this product are available upon request to Codan or a
Codan-authorised supplier.
To Next Page
Loading...
Need help?
General
