OPERATING THE TRANSCEIVER
USING ENCRYPTION
108 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
1 If you are using a 2221 Handset:
• From the main menu, select (Functions).
• Press or to scroll to the Secure Info function.
•Press (Select).
1 Press or to scroll to the Privacy Code entry.
1 Press or to select the code that you want to use.
Hold the key to scroll rapidly through the codes.
1 Press (Activate).
The transceiver goes secure on the selected code.
Adding a secure key
NOTE: Codan’s KMS may be used to generate secure keys and
to fill the CES and AES DV and data encryptors. KFS
may be used to fill keys to these encryptors.
NOTE: VCOM is used to provide virtual COM ports for
programming secure keys via KMS/KFS over the USB
connector on the control point.
NOTE: Only one application connected via VCOM may be
serviced by the RFU at a time.
If you are permitted to add a secure key for a CES-128 or AES-256
encryptor via the user interface of the control point, the transceiver
automatically selects the next empty secure index into which you can
enter a secure key. You cannot select the secure key index.
To Next Page
Loading...
