ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 1
1
Introduction
Congratulations on choosing a Codan Envoy Transceiver to meet your
HF communications needs. You can expect many years of reliable high
performance, and if ever assistance is required, Codan’s world-class
after-sales support team is ready to help. Please read this guide
thoroughly and retain it for future reference. There is an index at the end
of this guide to assist you in finding information.
Overview of this guide
This guide provides instructions on how to connect up your Envoy
Transceiver, and how to perform basic setup and operating tasks. It
assumes that you have limited knowledge of HF communication and of
using an HF transceiver.
Extensive reference material is provided on the CD at the back of this
guide.
NOTE: A range of options and accessories is available for the
Envoy Transceiver. For more information contact your
Codan representative or refer to the product catalogue
that is applicable to your transceiver.
This guide contains the following sections:
Introduction—provides an overview of the components of the
transceiver system
Using the wizard—describes the steps in the wizard that are used to set
up the transceiver
Operating the transceiver—describes how to operate the transceiver and
how to make calls
Adding a contact—describes how to add a contact
To Next Page
Loading...
Need help?
General
