OPERATING THE TRANSCEIVER
CALLING
64 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
1 Press to scroll through the details of the missed call.
1 Press (Close).
1 If you want to return a missed call, scroll to the call, press CALL,
then continue with the call.
Making a call when multiple control points are
connected to the same RFU
When multiple control points are connected to the same RFU and a call
is made, certain activities may be excluded if the control point does not
have control of the call. If two or more control points have the same self
address registered for use in the HF network, and one of these stations
makes a call, then any control points with the same self address also
have control of the outgoing call. PTT is on a first-come, first-served
basis, and all other control points are not able to PTT while the RFU is
in the transmit state. Control points that have a different self address
registered may be able override calling and system locks.
NOTE: For more information on registering a self address for
your control point, see the Reference Manual.
Control points that have control of a call show the same calling
information. Control points that do not have control of the call show a
System busy pop-up if an attempt to interrupt or join the call is made.
You may have to switch off mute and change the mute type to be able
to hear the conversation.
To Next Page
Loading...
Need help?
General
