NAVIGATING THE MENU STRUCTURE
ENTERING TEXT IN A FIELD
144 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Entering text with the 2221 Handset
The 2221 Handset does not have alphanumeric keys, however, you can
still enter text into fields within the user interface.
CAUTION: This process describes how to enter text into an entry
field using the virtual keypad, then save the text back to
the entry. At this point, the change to the entry itself has
not been saved.
To enter text:
1 Navigate to an entry in which you can enter text, then press OK
to see the virtual keypad.
NOTE: The English version is shown, however, virtual
keypads exist for other supported languages.
1 Press , , or to move the highlight to the character that
you want to select, then press OK.
1 If you want to change the input language:
• Highlight , then hold OK.
• Press or to scroll to the input language that you
want to use, then press OK.
•Press (Save).
1 If you want to change case, enter a number, or enter a special
character, scroll to , then press OK until you see the
character-entry mode that you want to use.
1 Continue entering text in this manner.
To Next Page
Loading...
Need help?
General
