OPERATING THE TRANSCEIVER
USING GPS
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 83
NOTE: The Signal Strength and Satellites
Constellation tabs are available only when a
GPS receiver is used to provide the GPS
information.
Table 5: GPS information
Tab Description
Shows the latitude and longitude
readings from a GPS receiver, or from
Settings > GPS > My Position.
Altitude and speed readings are hidden
by default. The spinning circle shows
that the GPS receiver is active, and the
Last Fix reading shows the time lapse
from the last receipt of valid GPS
information.
Shows the distance and bearing from
your location to a selected waypoint.
To Next Page
Loading...
