Codan Envoy - Using GPS; Saving Your Current GPS Position as a Waypoint; Selecting a Waypoint

OPERATING THE TRANSCEIVER
USING GPS
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 75
Using GPS
Saving your current GPS position as a waypoint
To save your current GPS position as a waypoint:
1 Do one of the following:
•Press9|GPS.
• From the main menu, select (General), then
(GPS).
1 Press (Save).
1 Enter the name that you want to use for the waypoint.
1 Press (Options), scroll to Save, then press
(Select) to save the waypoint.
Selecting a waypoint
To select a waypoint:
1 Do one of the following:
•Press9|GPS.
• From the main menu, select (General), then
(GPS).
1 Press to move to the Distance and Bearing tab.
1 Press (Waypoint).
1 Press or to select the Waypoint tab.
1 Press to move to the waypoint that you want to set.
1 Press (Options), scroll to Set, then press (Select).