Codan Envoy - Setting the Brightness of the Display

OPERATING THE TRANSCEIVER
SETTING THE BASICS
48 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
1 Press or to select the type of clock that you want to use.
1 Press to move to the Time Format entry.
1 Press or to select the format that you want to use.
1 Press to move to the Date Format entry.
1 Press or to select the format that you want to use.
1 If you want to review the information that you have entered,
press or to move through the entries.
1 Press (Save) to save the information.
Setting the brightness of the display
To set the brightness:
1 Do one of the following:
•Press + 0.
• From the main menu, select (General), then
(Brightness).
1 Press or to scroll to the value that you want to set, then
press OK.
1 Press (Save) to save the information.