COMPLIANCE
OVERVIEW
172 ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Overview
This section describes how to ensure the Envoy Transceiver complies
with the European R&TTE Directive 1999/5/EC.
This section also contains the requirements for FCC, IC, and RCM.
European R&TTE Directive
The Envoy Transceiver has been tested and complies with the following
standards and requirements (articles of the R&TTE Directive):
• Article 3.1b: ETSI EN 301 489-1 V1.9.2
• Article 3.1b: ETSI EN 301 489-15 V1.2.1
• Article 3.2: Australian type approval according to AS/NZS
4770:2000 + transmitter RSE tests to the limits specified in
Annex 6, section 6.1.2 of CEPT/ERC/Recommendation 74-01E
• Article 3.1a: assessed against ICNIRP and FCC requirements
• Article 3.1a: (LVD) EN 60950-1:2006/AC:2011
• Article 3.1a: (MPE) EN 62311:2008
Product marking and labelling
Any equipment supplied by Codan that satisfies these requirements is
identified by the markings displayed on the product.
To Next Page
Loading...
