Codan Envoy Control Getting Started Guide

INTRODUCTION
KEYPAD
8ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
Keypad
Standard macros are programmed in the transceiver in the factory. You
can also create a macro and assign it to a hot key.
NOTE: For more information, please see the Reference Manual.
Table 1: Keys and their function
Key Function
Switches on the transceiver.
Switches off the transceiver (hold for 2 sec).
Performs a hot-key sequence with another key (hold
+ key):
• + 0 jumps to the Brightness screen
• + 2 toggles advanced view
• + 3 jumps to the Select Language screen
(admin hidden)
• +
SEC performs secure erase (if enabled)
• + locks and/or erases important
information in your transceiver if you need to
abandon it (if enabled)
Starts a chain call of all of the calls included with the
selected emergency contact (hold for 2 sec).
PTT Press-to-talk.
Cancels out of editing and calls before they are
connected, returning directly to the channel/scanning
screen.
Performs the function shown directly above the key
in the menu bar of the screen.
Scrolls left in a list of values.
Moves the cursor/highlight to the left.

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English