INTRODUCTION
THE 2220 HANDSET
4ENVOY™ TRANSCEIVER GETTING STARTED GUIDE
The 2220 Handset is shipped from the factory with standard functions
pre-programmed to specific keys. The standard function is written on
the key in BLUE text. New user-defined functions may be assigned to
most of the keys.
NOTE: Handsets with a Mk 2 label on the rear escutcheon are
compatible with all transceiver configurations, and are
specifically designed to provide a received audio signal
for an Envoy SmartLink. Mk 2 handsets are identified in
Information > Device Information > Hardware
Options as Mk 2 (Envoy SmartLink enabled).
Related links:
Keypad on page 8
Navigating the menu structure on page 127
To Next Page
Loading...
