Codan Envoy Control Getting Started Guide

OPERATING THE TRANSCEIVER
CALLING
ENVOY™ TRANSCEIVER GETTING STARTED GUIDE 55
1 If you do not want to use the HF network shown at the top right
of the screen:
•Press (Options).
• Scroll to HF Networks, then press (Select).
• Scroll to the HF network that you want to use, then
press OK.
1 Press or to select the Selective call type if it is not selected.
NOTE: If you want to test the quality of the channel
before you make the actual call, hold CALL first.
1 Do one of the following:
• To repeat the call to the last address used, press CALL.
• To call a different station, enter the address, then
press CALL.
• To repeat or return a call from the Call Log, press to
scroll to the call, press or to select your required call
type, then press CALL.
• To use an ALE address syntax in an ALE/CALM HF
network, press (View), scroll to ALE, press
(Select), scroll to the syntax that you want to use, then
press CALL.

Codan Envoy Specifications

General

Brand	Codan
Model	Envoy
Category	Transceiver
Language	English