INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 178
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
System Log
Each page shows up to 999 table entries, selected through the “entries per page” input field.
When first visited, the web page will show the beginning entries of this table.
The “Level” input field is used to filter the display system log entries.
The “Clear Level” input field is used to specify which system log entries will be cleared.
To clear specific system log entries, select the clear level first then click the “Clear” button.
The “Start from ID” input field allow the user to change the starting point in this table. Clicking the
“Refresh” button will update the displayed table starting from that or the closest next entry match.
In addition, these input fields will upon a “Refresh” button click - assume the value of the first
displayed entry,allowing for continuous refresh with the same start input field.
The “>>” will use the last entry of the currently displayed table as a basis for the next lookup.
When the end is reached the text “No more entries” is shown in the displayed table. Use the “<<|”
button to start over.
Object Description
ID The identification of the system log entry.
Level The level of the system log entry. Info: The system log entry is belonged information level.”Warning:
The system log entry is belonged warning level.”Error: The system log entry is belonged error level.
Time The occurred time of the system log entry.
Message The detail message of the system log entry.
Auto_refresh Check to refresh the page automatically every 3 seconds.
Refresh Click to Updates the table entries, starting from the current entry.
Clear Click to Flush the selected entries.
|<< Click to update the table entries, starting from the first available entry.
<< Click to update the table entries, ending at the last entry currently displayed.
>> Click to update the table entries, starting from the last entry currently displayed.
To Next Page
Loading...
