INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 231
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
MAC Table
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
“entries per page” input field. When first visited, the web page will show the first 20 entries from
the beginning of the MAC Table. The first displayed will be the one with the lowest VLAN ID and
the lowest MAC address found in the MAC Table.
The “Start from MAC address” and “VLAN” input fields allow the user to select the starting point in
the MAC Table. Clicking the “Refresh” button will update the displayed table starting from that or
the closest next MAC Table match. In addition, the two input fields will - upon a “Refresh” button
click - assume the value of the first displayed entry, allowing for continuous refresh with the same
start address.
The “>>” will use the last entry of the currently displayed VLAN/MAC address pairs as a basis for
the next lookup. When the end is reached the text “No more entries” is shown in the displayed
table. Use the “<<” button to start over.
Object Description
Type Indicates whether the entry is a static or a dynamic entry.
MAC Address The MAC address of the entry.
VLAN The VLAN ID of the entry.
Port Members The ports that are members of the entry.
Auto_refresh Check to refresh the page automatically every 3 seconds.
Refresh Click to refresh the displayed table starting from the input fields.
|<< Click to update the table starting from the first entry in the MAC Table, i.e. the entry with the
lowest VLAN ID and MAC address.
>> Click to the table, starting with the entry after the last entry currently displayed.
To Next Page
Loading...
