EasyManua.ls Logo

Comnet CNGE3FE8MSPOE - AAA; RADIUS Overview

Comnet CNGE3FE8MSPOE
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 202
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
AAA
RADIUS Overview
This page provides an overview of the status of the RADIUS servers configurable on the
Authentication configuration page.
Object Description
RADIUS Authentication Servers
# The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address The IP address and UDP port number (in <IP Address> :< UDP Port> notation) of this server.
Status The current status of the server. This field takes one of the following values: Disabled: The server
is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The
server is enabled, IP communication is up and running and the RADIUS module is ready to accept
access attempts.
Dead (X seconds left): Access attempts were made to this server, but it did not reply within the
configured timeout. The server has temporarily been disabled, but will get re-enabled when the
dead-time expires. The number of seconds left before this occurs is displayed in parentheses.
This state is only reachable when more than one server is enabled.
RADIUS Accounting Servers
# The RADIUS server number. Click to navigate to detailed statistics for this server.
IP Address The IP address and UDP port number (in <IP Address> :< UDP Port> notation) of this server.
Status The current status of the server. This field takes one of the following values: Disabled: The server
is disabled.
Not Ready: The server is enabled, but IP communication is not yet up and running. Ready: The
server is enabled, IP communication is up and running and the RADIUS module is ready to accept
accounting attempts.
Dead (X seconds left): Accounting attempts were made to this server, but it did not reply within
the configured timeout. The server has temporarily been disabled, but will get re-enabled when
the dead-time expires. The number of seconds left before this occurs is displayed in parentheses.
This state is only reachable when more than one server is enabled.
Auto_refresh Check to refresh the page automatically every 3 seconds.
Refresh Click to refresh the displayed table starting from the input fields.

Table of Contents

Related product manuals