INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 47
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
SNMP Communities
Configure SNMPv3 community table on this page. The entry index key is Community.
Object Description
Delete Check to delete the entry. It will be deleted during the next save.
Community Indicates the community access string to permit access to SNMPv3 agent. The allowed string
length is 1 to 32, and the allowed content is ASCII characters from 33 to 126. The community
string will be treated as security name and map a SNMPv1 or SNMPv2c community string.
Source IP Indicates the SNMP access source address. A particular range of source addresses can be used
to restrict source subnet when combined with source mask.
Source Mask Indicates the SNMP access source address mask.
Apply Click to apply changes.
Reset Click to revert to previous values.
Add New Entry Click to add a new community.
To Next Page
Loading...
