INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 55
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Network
Limit Control
This page allows you to configure the Port Security Limit Control system and port settings.
Limit Control allows for limiting the number of users on a given port. A user is identified by a
MAC address and VLAN ID. If Limit Control is enabled on a port, the limit specifies the maximum
number of users on the port. If this number is exceeded, an action is taken. The action can be one
of the four different actions as described below.
The Limit Control module utilizes a lower-layer module, Port Security module, which manages
MAC addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide.
To Next Page
Loading...
