Comnet CNGE3FE8MSPOE - Show Running-Config Interface List [All-Defaults]

INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 290
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Show running-config interface list [all-defaults]
By using this filter, the user can review a specific list of Ethernet interfaces. This may contain
wildcards, for example:
My-device# show running-config interface 2.5GigabitEthernet *
Building configuration...
interface 2.5GigabitEthernet 1/1
speed 1000
duplex full
!
interface 2.5GigabitEthernet 1/2
!
end
In this example, there is only one VLAN on the system.
16.40 Show running-config interface vlan list [all-defaults]
It is also possible to filter the list of VLAN interface, for example:
my-device# show running-config interface vlan 1-10
Building configuration...
interface vlan 1
ip address dhcp fallback 192.168.10.2 255.255.0.0
!
end
In this example, there is only one VLAN interface on the system.