EasyManua.ls Logo

Comnet CNGE3FE8MSPOE - Using Show Commands

Comnet CNGE3FE8MSPOE
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 283
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
my-device(config)# username operator privilege 10 password unencrypted a-secret
my-device(config)# username monitor privilege 1 password unencrypted new-secret
! Verify that the configuration is correct. Note that passwords are displayed ! in encrypted form:
my-device(config)# do show running-config | include username
username admin privilege 15 password encrypted
3ad61dc090116a16a7cc9861485e60e6407c5a328015b1985b585ab353c37a4441e034172401
528229795a5c9529dfbc04c86e01aaaaaaaaaaaaaa
Username operator privilege 10 password encrypted
015b1985b585ab353c37a4441e034172401528229795a5c9529dfbc04c86e012138abcd88dda
222affea861485e60e6407c5a328
username monitor privilege 1 password encrypted
7cc9861485e60e6407c56a16a7cc9861485e60e6407c5a328441e034172401528229795a5c95
229795a5c9529dfbc04c86e01abc
! Delete the ‘operator’ user and verify it is removed from the configuration: my-device(config)# no
username operator
my-device(config)# do show running-config | include username
username admin privilege 15 password encrypted
ad61dc090116a16a7cc9861485e60e6407c5a328015b1985b585ab353c37a4441e0341724015
28229795a5c9529dfbc04c86e01
username monitor privilege 1 password encrypted
7cc9861485e60e6407c56a16a7cc9861485e60e6407c5a328441e034172401528229795a5c95
229795a5c9529dfbc04c86e01abc
Using Show Commands
The family of show commands is the cornerstone of ICLI-based system monitoring. Most
features implement one or more show commands that will display a relevant mix of status and
configuration.
Note: The exact set of available commands, parameters, and output format depends on the
system configuration and software version, so some of the following commands and examples
may not be applicable to all systems.
The show commands exist only in the two Exec modes and are subject to session privilege level
enforcement. Therefore, listing the largest possible set of show commands requires the session to
be at level 15.

Table of Contents

Related product manuals