EasyManua.ls Logo

Comnet CNGE3FE8MSPOE - Using Reload Commands

Comnet CNGE3FE8MSPOE
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 295
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Using Reload Commands
! Reload defaults, but try to keep VLAN 1 configuration. First list current IP ! settings:
my-device# show ip interface brief
Vlan Address Method Status
1 192.168.10.17/24 DHCP UP
my-device# reload defaults keep-ip
% Reloading defaults, attempting to keep VLAN 1 IP address. Please stand by. # show ip interface
brief
Vlan Address Method Status
1 192.168.10.17/24 DHCP UP
! Contents of flash: are unchanged: my-device# dir
Directory of flash:
r- 1970-01-01 00:00:00 648 default-config
rw 1970-01-06 05:33:18 1237 startup-config
rw 1970-01-01 19:54:01 1237 backup
3 files, 3122 bytes total.
! Reload again, but don’t try to keep VLAN 1 settings:
# reload defaults
% Reloading defaults. Please stand by.
! Verify that the default IP settings have been restored:
# show ip interface brief
Vlan Address Method Status
1 192.0.2.1/24 Manual UP
! Reboot the system
# reload cold
% Cold reload in progress, please stand by. ! ... bootup output omitted ...

Table of Contents

Related product manuals