INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 28
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
Frame Check Length Configures whether frames with incorrect frame length in the EtherType/Length field shall
be dropped. An Ethernet frame contains a field EtherType which can be used to indicate the
frame payload size (in bytes) for values of 1535 and below. If the EtherType/Length field is
above 1535, it indicates that the field is used as an EtherType (indicating which protocol is
encapsulated in the payload of the frame). If "frame length check" is enabled, frames with
payload size less than 1536 bytes are dropped, if the EtherType/Length field doesn't match
the actually payload length. If "frame length check" is disabled, frames are not dropped due
to frame length mismatch.
Note: No drop counters count frames dropped due to frame length mismatch.
Apply Click to apply changes.
Reset Click to revert to previous values.
To Next Page
Loading...
