INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 286
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Using Context-sensitive Help for Discovery
The context-sensitive help feature for syntax display is also useful for determining the exact
command to execute. In the following example, the user discovers the proper command show ip
statistics system through exploration:
my-device# show ip ?
arp Address Resolution Protocol
dhcp Dynamic Host Configuration Protocol
http Hypertext Transfer Protocol
igmp Internet Group Management Protocol
interface IP interface status and configuration
name-server Domain Name System
route Display the current ip routing table
source source command
ssh Secure Shell
statistics Traffic statistics
verify verify command
my-device# show ip statistics ?
| Output modifiers
icmp IPv4 ICMP traffic
icmp-msg IPv4 ICMP traffic for designated message type
interface Select an interface to configure
system IPv4 system traffic
<cr>
! A repeated press of ‘?’ displays the syntax:
my-device# show ip statistics ?
show ip statistics [ system ] [ interface vlan <v_vlan_list> ] [ icmp ]
[ icmp-msg <type> ]
my-device# show ip statistics system IPv4 statistics:
Rcvd: 2768 total in 181458 bytes
To Next Page
Loading...
