INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 308
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
7. On Switch 1, check ERPS status by clicking ERPS to ensure normal link status
Figure 27 – Switch 1 ERPS Status
8. Disconnect the normal link for switch 1 and switch 3.
Figure 28 – Disconnect Normal Link
9. Restore the normal link for switch 1 and switch 3 to display the protection state as Pending.
Figure 29 – Restore Normal Link
To Next Page
Loading...
