Comnet CNGE3FE8MSPOE - Page 33

INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 33
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
Pool
Name Select a pool by pool name.
Setting
Name Display the selected pool name.
Type Specify which type of the pool is.
Network: the pool defines a pool of IP addresses to service more than one DHCP client.
Host: the pool services for a specific DHCP client identified by client identifier or hardware
address.
IP Specify network number of the DHCP address pool.
Subnet Mask DHCP option 1.
Specify subnet mask of the DHCP address pool.
Lease Time DHCP option 51, 58 and 59.
Specify lease time that allows the client to request a lease time for the IP address. If all are 0's,
then it means the lease time is infinite.
Domain Name DHCP option 15.
Specify domain name that client should use when resolving hostname via DNS.
Broadcast Address DHCP option 28.
Specify the broadcast address in use on the client's subnet.
Default Router DHCP option 3.
Specify a list of IP addresses for routers on the client's subnet.
DNS Server DHCP option 6.
Specify a list of Domain Name System name servers available to the client.
NTP Server DHCP option 42.
Specify a list of IP addresses indicating NTP servers available to the client.
NetBIOS Node Type DHCP option 46.
Specify NetBIOS node type option to allow Netbios over TCP/IP clients which are
configurable to be configured as described in RFC 1001/1002.
NetBIOS Scope DHCP option 47.
Specify the NetBIOS over TCP/IP scope parameter for the client as specified in RFC
1001/1002.
NetBIOS Name Server DHCP option 44.
Specify a list of NBNS name servers listed in order of preference.
NIS Domain Name DHCP option 40.
Specify the name of the client's NIS domain.
NIS Server DHCP option 41.
Specify a list of IP addresses indicating NIS servers available to the client.
Client Identifier DHCP option 61.
Specify client's unique identifier to be used when the pool is the type of host.
Hardware Address Specify client's hardware(MAC) address to be used when the pool is the type of host.
Client Name DHCP option 12.
Specify the name of client to be used when the pool is the type of host.