EasyManua.ls Logo

Comnet CNGE3FE8MSPOE - Network Access Server Configuration; System Configuration

Comnet CNGE3FE8MSPOE
314 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 59
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
System Configuration
Mode Indicates if NAS is globally enabled or disabled on the switch. If globally disabled, all ports are
allowed forwarding of frames.
Reauthentication
Enabled
If checked, successfully authenticated supplicants/clients are reauthenticated after the interval
specified by the Reauthentication Period. Reauthentication for 802.1X-enabled ports can be used
to detect if a new device is plugged into a switch port or if a supplicant is no longer attached.
For MAC-based ports, reauthentication is only useful if the RADIUS server configuration has
changed. It does not involve communication between the switch and the client, and therefore
doesn’t imply that a client is still present on a port (see Aging Period below).
Reauthentication
Period
Determines the period, in seconds, after which a connected client must be reauthenticated. This
is only active if the Reauthentication Enabled checkbox is checked. Valid values are in the range 1
to 3600 seconds.
EAPOL Timeout Determines the time for retransmission of Request Identity EAPOL frames.
Valid values are in the range 1 to 65535 seconds. This has no effect for MAC-based ports.

Table of Contents

Related product manuals