INS_CNGE3FE8MS[POE][HO] Rev. 11.7.17 PAGE 89
INSTRUCTION MANUAL CNGE3FE8MS[POE][HO]
TECH SUPPORT: 1.888.678.9427
Object Description
Advanced Settings
Edge Port BPDU Filtering Control whether a port explicitly configured as Edge will transmit and receive BPDUs.
Edge Port BPDU Guard Control whether a port explicitly configured as Edge will disable itself upon reception of
a BPDU. The port will enter the error-disabled state, and will be removed from the active
topology.
Port Error Recovery Control whether a port in the error-disabled state automatically will be enabled after a
certain time. If recovery is not enabled, ports have to be disabled and re-enabled for
normal STP operation. The condition is also cleared by a system reboot.
Port Error Recovery
Timeout
The time to pass before a port in the error-disabled state can be enabled. Valid values are
between 30 and 86400 seconds (24 hours).
Apply Click to apply changes.
Reset Click to revert to previous values.
To Next Page
Loading...
