Concordia XPRESS - Changing the Flavor Pour Rate

3033-009B Section 9: Flavor System
Concordia Xpress Technical Support Manual 9-5
2900-300B
Changing the Flavor Pour Rate
1. Place a measuring cup under the product nozzle.
2. Press the service switch into the CLEAN position.
3. Press the PROGRAM button three times.
4. Navigate to FLAVOR TIMINGS.
5. Press the PROGRAM button once, and then scroll to the desired
flavor.
6. Press the upper right arrow to increase the amount of flavor or
press the lower right arrow to decrease the amount of flavor.
7. Press the PROGRAM button once to exit the FLAVOR TIMINGS
category.
8. Press the CANCEL button to exit the menu system.
9. Pour a drink with the desired flavor, to ensure amount of flavor is
to taste.
Software Sub-
Category
Color Code
Corresponding Flavor
Small Flavor 1
Black
Chocolate
Large Flavor 1
Small Flavor 2
Yellow
Caramel
Large Flavor 2
Small Flavor 3
White
Vanilla
Large Flavor 3
Small Flavor 4
Red
Chai
Large Flavor 4
Small Flavor 5
Green
Hazelnut
Large Flavor 5
Small Flavor 6
Blue
Sugar-Free Vanilla
Large Flavor 6
Chocolate sauce flows at the rate of 0.28oz (8.31mL) per second.
Flavor syrups flow at the rate of 0.31oz (9.2mL) per second.
EXAMPLE: If the chocolate sauce timing is set for seven seconds, then
1.96oz (58.17mL) of sauce should be in the cup.
EXAMPLE: If the vanilla timing is set for ten seconds, 3.1oz (92mL) of
flavor should be in the cup.
When the amount of flavor, or an additional flavor, is increased or
decreased in a drink, the milk pour time must be adjusted to
accommodate the change. The adjustment to the milk pour time is
controlled in the FLAVOR TIMINGS sub-category by the values SMALL
1-FLAVOR ADJ, SMALL 2-FLAVOR ADJ, LARGE 1-FLAVOR, LARGE
2-FLAVOR ADJ.