Concordia XPRESS - Recommended Tools List; Concordia Stocked Tools; Consumables

Section 16: Parts Lists & Diagrams 3033-016B
16-2 Concordia Xpress Technical Support Manual
2900-300B
Recommended Tools List
Standard Tools
3” Socket extension 1/2” drive
Jeweler’s Screwdriver
Complete set of Allen wrenches in metric/ASE
Snap-ring Pliers
11/32” Nut driver or socket
7/16” Wrench
1/4” Drive Socket wrench w/extension &
universal joint
Torque wrench, up to 30 FP & Driver 10
CBS
3/32” Ball Driver
1/2” Wrench
#2 Phillips Screwdriver – 4”
9/16” Wrench
#2 Phillips Screwdriver – 10”
5/8” Wrench
#2 Flat Screwdriver
11/16” Wrench
Angled Driver - Skewdriver®
¾” Wrench
#2 Phillips Bit – 1/4” drive
11/32” Wrench
4mm Bit – 1/4” drive
10mm Wrench
Needle Nose Pliers
1.5” Socket
10” Channelocks®
Digital Thermometer
Combo Crimper/Stripper Tool
ESD Mat and Strap
6” Snippers/Flush Cutters
Socket adapter 1/2”F x 3/8M
Socket Wrench 1/2” drive
3/8” Wrench
#2 Square drive
Clamps
Concordia Stocked Tools
CONCORDIA PART NUMBER
Pin Removal AMP – Medium
4100-003
Group Motor Removal Tool
4100-014
Small Pin Remover
4100-016
Consumables
CONCORDIA PART NUMBER
Heat sink compound
3900-003
Superlube pen
3100-002
Teflon tape – 1/4” & 1/2”
3300-013
Ty-Wrap (100)
1454-014
RTV silicone seal
3200-003