3033-001B Section 1: Xpress Overview
Concordia Xpress Technical Support Manual 1-3
2900-300B
Xpress Components
Front Panel Touch Pad
The front panel touch pad provides a user interface for selecting and
pouring drinks.
Electrical Enclosure and CPU
The electrical enclosure houses the CPU, AC drawer, and DC board.
Bean Hoppers
Each bean hopper holds whole espresso roast beans and feeds the
beans to the grinders.
Water Pump and Motor
The water pump regulates the water pressure to 135-140psi during the
espresso extraction process. The motor supplies power to the pump.
Hot Water Tank
The hot water tank stores and heats the water used to brew espresso.
Brew Group
The brew group assembly brews espresso and automatically discards
the used coffee into the grounds bin.
Steam Tank
The steam tank provides steam used for steaming the milk.
Grinders and the Grinder Adjustment Assembly
The grinders are calibrated to grind espresso beans according to the
customer’s recipe. The grinder adjustment assembly changes the grind
of espresso beans.
Exhaust Fan
NOT SHOWN
The exhaust fan removes excess heat build-up from the machine interior.
Refrigeration Unit
The refrigeration unit stores the milk used for drinks.
Refrigeration Module Assembly
The refrigeration module assembly regulates the temperature inside the
refrigeration unit.
Milk Pump and Milk Pump Box Assembly
The milk pump assembly draws milk from the milk container.
Syrup Manifold
Xpress 6 only
Flavor is infused into drinks via the syrup manifold.
Product Delivery Bracket
The product delivery bracket holds the milk bowl (not shown) and the
syrup manifold.
Product Delivery Nozzle
The finished drink is poured through the product delivery nozzle and into
the customer’s cup.
To Next Page
Loading...
