Concordia XPRESS - Exiting the Menu System; Accessing the Grand Total Drink Count; Accessing Total Drink Count Statistics; Accessing Daily Drink Count Statistics

3033-004B Section 4: Software
Concordia Xpress Technical Support Manual 4-5
2900-300B
Exiting the Menu System
To exit a sub-category, press the PROGRAM button once.
To exit the menu system, press the CANCEL button.
Accessing the Grand Total Drink Count
1. Press the PROGRAM button once
2. The drink GRAND TOTAL appears in the display
The display will automatically return to SELECT DRINK after a few
seconds
The grand total drink statistic is only reset through the installation of a
new CPU.
NOTE: Grand total drink statistics must be recorded at the start and
end of each service call.
Accessing Total Drink Count Statistics
1. Press the PROGRAM button three times (press slowly, you will
hear a beep after each press).
2. SELECT CATEGORY will appear in the display.
3. Scroll to the sub-category TOTAL DRINK COUNTS.
4. Press the PROGRAM button.
5. Press the SCROLL UP arrow to scroll through the drink count
statistics.
To Exit:
1. Press the PROGRAM button once.
2. Press any drink button.
Accessing Daily Drink Count Statistics
Daily statistics are reset after a brew clean cycle is completed.
1. Press the PROGRAM button three times (press slowly, you will
hear a beep after each press).
2. SELECT CATEGORY will appear in the display.
3. Scroll to the sub-category DAILY DRINK COUNTS.
4. Press the PROGRAM button.
5. Press the SCROLL UP arrow to scroll through the statistics.
6. Press the PROGRAM button once to exit.
To Exit:
1. Press the PROGRAM button once.
2. Press any drink button.