108
MINI-DRIVER
HANDPIECE
E
3.10.5.2 1/4” Jacobs Chuck (K109)
This attachment is designed to drive straight
shank twist drill bits, pins, and wires compatible
with the specifications below:
Specifications:
3.10.5.3 High-Torque Jacobs Chuck
(K210)
This attachment is designed to drive large
(6 mm - 14 mm) cannulated drill bits and pins.
Accepts drill bits and other accessories
compatible with the specifications below:
Specifications:
Jaw Cannulation: 0 - 6.35 mm
(0 to 0.25 in.)
(0 to 1/4 in.)
Through Cannulation: 4.0 mm
(0.156 in.)
(5/32 in.)
Associated Chuck Key: D298L or
5044-999-52
Jaw Cannulation: 0 - 6.35 mm
(0 to 0.25 in.)
(0 to 1/4 in.)
Through Cannulation: 2.4 mm
(0.094 in.)
(3/32 in.)
Associated Chuck Key: D298L or
5044-999-52
To Next Page
Loading...
