49
CONTROLLER
OPERATION
A
4. To adjust the irrigation flow rate
(Advantage Top Portion Only and E9000):
(a) Press the flow increase or decrease
button on the front panel.
NOTE: If using the E9414 Tubing Set with
the CoolFlex Drill, the flow rate cannot be
changed. The display will show āPRESETā
for the flow rate.
2.1.6 PowerPro Console Irrigation
This information describes the installation and
utilization of the Hall Irrigation Pump
(5040-039, 110 VAC or 5040-239, 220 VAC)
with the Power
Pro controller. This irrigation
pump is no longer sold.
2.1.6.1 Irrigation Pump Installation
NOTE: The Irrigation Pump only operates
with MicroChoice drills and saws and the
MC9840 or C9840 Small Shaver Handpieces.
PRECAUTION: The Hall Irrigation
Pump (5040-039 or 5040-239) should be
utilized if irrigation is required when using
the MicroChoice Drills or Saws, or the
MC9840 or C9840 Small Shaver Handpieces.
For additional information regarding
Irrigation set-up, refer to the Hall Irrigation
System Instruction Manual or contact Hall
Surgical.
To Next Page
Loading...
