EasyManua.ls Logo

ConMed Advantage - 1.4 Symbol Definitions; Controller Markings

ConMed Advantage
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
1.4 Symbol Definitions
Controller Markings
Stand-by (ON/OFF)
Follow instructions for use.
Precaution or warning notice
Warning - For continued
protection against risk of fire,
replace only with the same
type and rating fuse
Mains Fuse
Flammable Anesthetics - Risk
of explosion if used in the
presence of flammable
anesthetics.
Type B equipment
Alternating Current
Protective earth ground
Waste Electronics and
Electrical Equipment (WEEE)
Symbol. Regarding European
Union end-of-life of product.
Caution: Federal Law
restricts this device to sale by
or on the order of a physician.
Footswitch Connection
~
Rx ONLY
Speed (rpm) Selection
E9000 Series Handpiece
Connection
MicroChoice Drills and Saws
Connection
MicroChoice, Advantage, and
APEX Shaver
Handpiece Connection
PowerPro Handpiece
Connection
Irrigation (Flow) Control
Speed (rpm) Selection
Adjustment to a maximum
(Increase)
Adjustment to a minimum
(Decrease)
Predetermined setting for
irrigation flow using the
CoolFlex High Speed Drill
with the E9414 Tubing Set
Revolutions Per Minute
Maximum Operating Speed
Minimum Operating Speed
PRESET
RPM
Max
Min

Table of Contents

Related product manuals